Mechanical ventilation Skills and techniques

The outer layer had significantly higher SG and bending properties than the inner layer. The SG varied along the culm height. The top portions had consistently higher SG than the base. Bending strength had a strong positive correlation with SG. In order to industrially use bamboo strips efficiently, it is advisable to remove minimal surface material to produce high strength bamboo composites. Compression properties parallel to the longitudinal direction was significantly higher than perpendicular to the longitudinal direction. As expected, at the same panel density level, the strength properties of the fiberboard increased with the increasing of resin.

Không thể tạo bản xem trước, hãy bấm tải xuống
TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.