Đang chuẩn bị liên kết để tải về tài liệu:
On the effect of temperature on the threshold stress intensity factor of delayed hydride cracking in light water reactor fuel cladding

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

This work studies the threshold stress intensity factor (KIH) to initiate DHC as a function of temperature in Zry-4 for temperatures between 227 C and 315 C. The experimental technique used in this study was the pin-loading testing technique. To determine the KIH, an unloading method was used where the load was successively reduced in a stepwise manner until no cracking was observed during 24 hours. | On the effect of temperature on the threshold stress intensity factor of delayed hydride cracking in light water reactor fuel cladding

Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.