Đang chuẩn bị liên kết để tải về tài liệu:
solaris 9 student guide part 2 sa299 phần 7

Thực hiện quản lý thẻ thông minh 4. Để thiết lập một mã PIN mới: a. b. Chọn tab Configuration PIN. Nhập mã PIN mới, và nhấp vào Thay đổi. Thay đổi PIN: Nhập mã PIN cửa sổ xuất hiện, như thể hiện trong hình 12-23. | Performing Smartcard Administration 4. To set a new PIN a. Select the PIN Configuration tab. b. Enter the new PIN and click Change. The Change PIN Enter PIN window appears as shown in Figure 12-23. Figure 12-23 Change PIN Enter PIN c. Enter the current PIN. The default current PIN is set to java. d. Click OK. 5. To modify the user profiles a. Click the User Profiles tab. Currently the dtlogin application is the only available and supported application. Therefore the profile name must be dtlogin. b. Type dtlogin in the User Profile Name field. c. Add a valid user name and password for this card. d. Click Set to update the user profile. Performing Smartcard Authentication Copyright 2002 Sun Microsystems Inc. All Rights Reserved. Enterprise Services Revision A 12-23 Performing Smartcard Administration Note - Users can change their own PIN using the SmartCard Console. The Set User Profile Enter PIN window appears as shown in Figure 12-24. Figure 12-24 Set User Profile Enter PIN Window e. Enter a PIN for the user profile. Caution - Do not forget the new PIN. You cannot modify the current information on the card without the PIN. f. Click OK in the Set User Profile Enter PIN window. 6. Click OK. 12-24 Advanced System Administration forthe Solaris 9 Operating Environment Copyright 2002 Sun Microsystems Inc. All Rights Reserved. Enterprise Services Revision A Performing Smartcard Administration Activating Smartcard Operations The Smartcard is now configured and ready to use. Next you must activate the application configured for that Smartcard on the client. When you activate a Smartcard you use The Desktop Configuration Dialog window and its four tabs Cards Authentications - Displays the current cards and the authentication scheme used by the desktop. Defaults - Lets you set defaults from a list of available resources for the desktop. These resources include the Smartcards Card Reader and type of Authentication. Timeouts - Modify functionality Options - Modify functionality