Tham khảo tài liệu 'handbook of workability and process design part 1', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | Handbook of Workability and Process Design Edited by George E. Dieter Howard A. Kuhn s. Lee Semiatin The Materials Information Society Copyright 2003 by ASM International All rights reserved No part of this book may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the written permission of the copyright owner. Frist printing September 2003 Great care is taken in the compilation and production of this book but it should be made clear that NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE GIVEN IN CONNECTION WITH THIS PUBLICATION. Although this information is believed to be accurate by ASM ASM cannot guarantee that favorable results will be obtained from the use of this publication alone. This publication is intended for use by persons having technical skill at their sole discretion and risk. Since the conditions of product or material use are outside of ASM s control ASM assumes no liability or obligation in connection with any use of this information. No claim of any kind whether as to products or information in this publication and whether or not based on negligence shall be greater in amount than the purchase price of this product or publication in respect of which damages are claimed. THE REMEDY HEREBY PROVIDED SHALL BE THE EXCLUSIVE AND SOLE REMEDY OF BUYER AND IN NO EVENT SHALL EITHER PARTY BE LIABLE FOR SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES WHETHER OR NOT CAUSED BY OR RESULTING FROM THE NEGLIGENCE OF SUCH PARTY. As with any material evaluation of the material under end-use conditions prior to specification is essential. Therefore specific testing under actual conditions is recommended. Nothing contained in this book shall be construed as a grant of any right of manufacture sale use or reproduction in connection with any method process apparatus .
