CCNA Exploration định tuyến giao thức và khái niệm: RIP phiên bản 1 Lab : RIP khắc phục sự cố • • • • • • Khám phá nơi hội tụ là không hoàn thành. Thu thập thông tin về phần không hội tụ của mạng cùng với bất kỳ lỗi nào khác. | CCNA Exploration Routing Protocols and Concepts RIP version 1 Lab RIP Troubleshooting Discover where convergence is not complete. Gather information about the non-converged portion of the network along with any other errors. Analyze information to determine why convergence is not complete. Propose solutions to network errors. Implement solutions to network errors. Document the corrected network. Scenario In this lab you will begin by loading configuration scripts on each of the routers. These scripts contain errors that will prevent end-to-end communication across the network. You will need to troubleshoot each router to determine the configuration errors and then use the appropriate commands to correct the configurations. When you have corrected all of the configuration errors all of the hosts on the network should be able to communicate with each other. The network should also have the following requirements met RIPv1 routing is configured on the BRANCH router. RIPv1 routing is configured on the HQ router. RIP updates must be disabled on the BRANCH and HQ LAN interfaces. Static default route is configured on the HQ router and shared with the BRANCH router via RIP updates. Static routes for all HQ and BRANCH networks are to be configured on the ISP router. The routes must be summarized wherever possible. Task 1 Cable Erase and Reload the Routers. Step 1 Cable a network. Cable a network that is similar to the one in the Topology Diagram. Step 2 Clear the configuration on each router. Clear the configuration on each of routers using the erase startup-config command and then reload the routers. Answer no if asked to save changes. Task 2 Load Routers with the Supplied Scripts. Step 1 Load the following script onto the BRANCH router. hostname BRANCH no ip domain-lookup interface FastEthernet0 0 ip address duplex auto speed auto interface Serial0 0 0 ip address clock rate 64000 no shutdown router rip All contents
