CCNA Exploration _part7

CCNA Exploration định tuyến giao thức và khái niệm: RIPv2 Lab : Cấu hình RIPv2 Challenge Lab Subnet mask sẽ được sử dụng cho các subnet LAN2 CHI NHÁNH? __ Số lượng tối đa của địa chỉ host có thể được sử dụng trên mạng con này là gì? _ Subnet mask sẽ được sử dụng cho liên kết giữa HQ và các bộ định tuyến CHI NHÁNH | CCNA Exploration Routing Protocols and Concepts RIPv2 Lab RIPv2 Challenge Configuration Lab What subnet mask will be used for the BRANCH LAN2 subnet What is the maximum number of host addresses that could be used on this subnet What subnet mask will be used for the link between the HQ and BRANCH routers What is the maximum number of host addresses that could be used on this subnet Step 3 Assign subnetwork addresses to the Topology Diagram. 1. Assign subnet 0 of the network to the HQ LAN1 subnet. What is the network address of this subnet 2. Assign subnet 1 of the network to the HQ LAN2 subnet. What is the network address of this subnet 3. Assign subnet 2 of the network to the BRANCH LAN1 subnet. What is the network address of this subnet 4. Assign subnet 3 of the network to the BRANCH LAN2 subnet. What is the network address of this subnet 5. Assign subnet 4 of the network to the link between the HQ and BRANCH routers. What is the network address of this subnet Task 2 Determine Interface Addresses. Step 1 Assign appropriate addresses to the device interfaces. 1. Assign the first valid host address in the 27 network to the LAN interface on the ISP router. 2. Assign the last valid host address in 27 network to PC5. 3. Assign the first valid host address in the 27 network to the WAN interface of ISP. 4. Assign the last valid host address in the 27 network to the Serial 0 0 1 interface of HQ. 5. Assign the first valid host address in the HQ LAN1 network to the LAN1 interface of HQ. 6. Assign the last valid host address in the HQ LAN1 network to PC 3. 7. Assign the first valid host address in the HQ LAN2 network to the LAN2 interface of HQ. 8. Assign the last valid host address in the HQ LAN2 network to PC 4. 9. Assign the first valid host address in the HQ BRANCH WAN link to the Serial 0 0 0 interface of HQ. 10. Assign the last valid .