Hãy tham khảo để triển cả các cổng cạnh được cấu hình với lệnh portfast spanning-tree. Host1 kết nối với cổng Fa0 / 1 trên switch SW1. Tuyên bố là đúng sự thật về tình trạng của cổng Fa0 / 1? Các cổng sẽ chuyển đổi thành nhà nước ngăn chặn. Cảng sẽ chuyển đổi ngay lập tức vào trạng thái chuyển tiếp. | Refer to the exhibit. All edge ports are configured with the spanning-tree portfast command. Hostl is recently connected to port Fa0 1 on switch SW1 . Which statement is true about the status of port Fa0 1 Switch2 20 48 19 CDP-4-NATIVE_VLAN_MISMATCH Native VLAN mismatch discovered on FastEthernetO l 1 with 51 FastEthernetO l 100 Switchl show int FaO 1 switchport Name FaO 1 Switchport Enabled Administrative Mode trunk Operational Mode trunk Administrative Trunking Encapsulation dotlq Operational Trunking Encapsulation dotlq Negotiation of Trunking On Access Mode VLAN 1 default Trunking Native Mode VLAN 100 Inactive Coutput omitted Switch2 show int Fa0 l switchport Name Fa0 l Switchport Enabled Administrative Mode dynamic desirable Operational Mode trunk Administrative Trunking Encapsulation dotlq Operational Trunking Encapsulation native Negotiation of Trunking On Access Mode VLAN 2 VLAN0002 Trunking Native Mode VLAN 1 default coutput omitted Refer to the exhibit. After receiving a console notification on Switch2 the network administrator begins to troubleshoot the trunk link between Switch1 and Switch2. Which configuration change can be made to cor problem with the trunk link Refer to the exhibit. A network administrator configures HyperTerminal with the parameters shown but is unable to connect to a switch via the console port. The administrator is using a tested rollover cable attached the only COM port on the computer and the connections have been verified. What is the likely problem
