Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài: Dynamic response of a cracked atomic force microscope cantilever used for nanomachining | Nanoscale Research Letters SpringerOpen0 This Provisional PDF corresponds to the article as it appeared upon acceptance. Fully formatted PDF and full text HTML versions will be made available soon. Dynamic response of a cracked atomic force microscope cantilever used for nanomachining Nanoscale Research Letters 2012 7 131 doi 1556-276X-7-131 Haw LONG Lee hawlong@ Win JIN Chang changwj@ ISSN 1556-276X Article type Nano Express Submission date 24 September 2011 Acceptance date 15 February 2012 Publication date 15 February 2012 Article URL http content 7 1 131 This peer-reviewed article was published immediately upon acceptance. It can be downloaded printed and distributed freely for any purposes see copyright notice below . Articles in Nanoscale Research Letters are listed in PubMed and archived at PubMed Central. For information about publishing your research in Nanoscale Research Letters go to http authors instructions For information about other SpringerOpen publications go to http 2012 Lee and Chang licensee Springer. This is an open access article distributed under the terms of the Creative Commons Attribution License http licenses by which permits unrestricted use distribution and reproduction in any medium provided the original work is properly cited. Dynamic response of a cracked atomic force microscope cantilever used for nanomachining Haw-Long Lee1 and Win-Jin Chang 1 department of Mechanical Engineering Kun Shan University Tainan 71003 Taiwan Corresponding author changwj@ Email addresses HLL hawlong@ WJC changwj@ Abstract The vibration behavior of an atomic force microscope AFM cantilever with a crack during the nanomachining process is studied. The cantilever is divided into two segments by the crack and a rotational spring is used to simulate the crack. The two individual .
