The clamping and lifting device is normally stored at an adequate distance from the winding ropes where it is protected by a weather-proof shelter. From this position it can be moved, as required, into the winding compartments and be arranged for the pre-selected pulling direction. Apart from the clamping and lifting operations, the device may also be shifted hydraulically. All functions are usually monitored by a PLC system in order to reliably ensure trouble-free operation. | A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks Lifter Studs and Lifting Hooks Eyebolts Clamping Claws Screws and Bolts D Guide Elements E Ground Precision Components F Springs G Elastomer-Bars -Sheets -Sections H FIBRO Chemical Tooling Aids J Peripheral Equipment K Slide Units L Standard Parts for Mould Making 2-1959-4 c 2 2-14960-2000-1 o subject to alterations c