Tham khảo tài liệu 'standalonelabs (1)', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | NETSIM FOR CCNA LAB MANUAL Stand-Alone Labs 88 Boson NetSim for CCNA Lab Manual NETSIM FOR CCNA LAB MANUAL Stand-Alone Labs Stand-Alone Labs Lab 1 Connecting to a Router Become familiar with the Cisco Router. Lab Equipment Router 1 from the eRouters menu Background Reading Lab Primer Lesson 1 Introduction to the Cisco Router Command-Line Interface 1. When the lab has finished loading the Router 1 window will open and the text Press Enter to Start will appear. 2. Click inside the Router 1 window and press the ENTER key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken into two parts the host name and the mode. Router is Router 1 s host name and the prompt indicates user mode. Press Enter to get Started Router 3. Next type the enable command to get to the privileged mode prompt. Router enable Router 4 . To return to user mode simply type disable. From user mode type logout or exit to exit the router. Router disable Router exit Router con0 is now available Press RETURN to get started Lab 2 Introduction to the Basic User Interface Objective Become familiar with the command-line interface CLI user and privileged mode and basic help and show commands. Lab Equipment Router 1 from the eRouters menu Background Reading Lab Primer Lesson 1 Introduction to the Cisco Router Command-Line Interface 1. Press the ENTER key to get to the router prompt. Router 2. The interface is now in user mode. At the user mode prompt type the command that is used to view all the commands available in user mode. Router 3. Type the command used to enter privileged mode. Router enable Router 4. Type the command that will allow you to view the available commands in privileged mode. Router Boson NetSim for CCNA Lab Manual 89 NETSIM FOR CCNA LAB MANUAL Stand-Alone Labs 5. Type the command that will allow you to see all of the show commands. Router show 6. Type the command that will allow you to see the active or running configuration. .
