(BQ) Electrical Discharge Machining (EDM) is a non-traditional machining process which is more efficient than traditional maching process due to ease of machining of difficult-to-machine materials with complex shapes. EDM is used for machining of toughened and high strength conductive materials which is hard enough to cut by traditional processes. | Available online at ScienceDirect Procedia Materials Science 5 (2014) 1702 – 1709 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (). Selection and peer-review under responsibility of Organizing Committee of AMME 2014 2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (). Selection and peer-review under responsibility of Organizing Committee of AMME 2014 doi: Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709 1703 1704 Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709 Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709 1705 1706 Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – .
