Application of acid modified red mud for lead ion removal from aqueous solution

In this study, the Pb(II) adsorption experiments with the single acid modified red mud were conducted as a function of initial pH, adsorbent doses, contact time, initial Pb(II) concentrations, and competitive ions. The adsorption results pointed that the highest Pb(II) removal efficiency was achieved at the initial pH , adsorbent dose g/L, shaking speed 150 rpm and contact time around 60 minutes at the room temperature. The adsorption results arrowed that the Pb(II) removal efficiency of the modified red mud was enhanced to 150% compared to the raw red mud. | Journal of Science and Technology 54 (2A) (2016) 186-194 APPLICATION OF ACID MODIFIED RED MUD FOR LEAD ION REMOVAL FROM AQUEOUS SOLUTION Pham Thu Trang1, Tran Dac Chi 1, Huynh Trung Hai1*, Minoru Yoneda2 1 Faculty of Environment and Resources, Thu Dau Mot University, 06 Tran Van On Street, Phu Hoa Ward, Thu Dau Mot City, Binh Duong, Vietnam 2 Industrial University of HCM City, 12 Nguyen Van Bao Street, Go Vap District, Ho Chi Minh City, Vietnam 3 University of Science - Vietnam National University-Ho Chi Minh City, 227 Nguyen Van Cu, District 5, Ho Chi Minh City, Vietnam 4 Can Tho University, 3/2 Street, Ninh Kieu District, Can Tho City, Vietnam 5 Ministry of Transport, 80 Tran Hung Dao Street, Hoan Kiem District, Ha Noi, Vietnam * Email: minhtrung2007@ Received: 5 May 2016; Accepted for publication: 26 June 2016 ABSTRACT In this study, the Pb(II) adsorption experiments with the single acid modified red mud were conducted as a function of initial pH, adsorbent doses, contact time, initial Pb(II) concentrations, and competitive ions. The adsorption results pointed that the highest Pb(II) removal efficiency was achieved at the initial pH , adsorbent dose g/L, shaking speed 150 rpm and contact time around 60 minutes at the room temperature. The adsorption results arrowed that the Pb(II) removal efficiency of the modified red mud was enhanced to 150% compared to the raw red mud. The adsorption capacity of the modified red was measured of mg/g, higher compared to several previous studies using the same method and type of acid. The study also indicated that the Pb(II) adsorption kinetic and isotherm were best described by the Pseudo - second - order kinetic and fitted to linearly transform both Langmuir and Freundlich with correlation coefficient (R2) over . The data obtained in this study indicated that modified red mud by using acid can be used as an effective and low cost adsorbent for heavy metals removal from wastewater. Keywords: .

Không thể tạo bản xem trước, hãy bấm tải xuống
TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
68    92    5    29-03-2024
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.