Dehydration and rehydration processes of cement paste exposed to high temperature environments

Microstructural changes of an OPC cement paste after being exposed at various elevated temperatures and further rehydration have been evaluated using 29Si MAS-NMR. Thermogravimetry and XRD are also employed to complement the information. NMR studies of cement paste exposed to high temperatures demonstrate a progressive transformation of C-S-H gel that leads at 450◦C, to a modified C-S-H gel. For temperatures above 200◦C to a progressive formation of a new nesosilicate. At 750◦C, the transformation of C-S-H is complete into the nesosilicate form with a C2S stoichiometry close to larnite, but less crystalline. Also is observed an increase of portlandite that takes place up to temperatures of 200◦C. A progressive increase of calcite formation up to 450◦C is noticed. The ettringite disappearance below 100◦C is confirmed and the portlandite and calcite are converted to lime at 750◦C. The initial anhydrous phases as larnite and brownmillerite remain unaltered during heating. Rehydration of the heated samples (450 and 750◦C) shows recrystallization of calcite, portlandite and ettringite, and the C-S-H reformation from the new nesosilicate. The larnite and brownmillerite remain unaltered during rehydration. The developing of damaged due to the formation of microcracking is detected and improved because of rehydration phenomena. | Dehydration and rehydration processes of cement paste exposed to high temperature environments

Không thể tạo bản xem trước, hãy bấm tải xuống
TÀI LIỆU MỚI ĐĂNG
185    321    3    25-04-2024
81    73    1    25-04-2024
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.