Multi-regression prediction model for surface roughness and tool wear in turning novel aluminum alloy (LM6)/fly ash composite using response surface and central composite design methodology

The test for significance of the regression models, the test for significance on individual model coefficients and the lack-of-fit tests were performed using the statistical software environments. R2 indicated the model significance and the value was more than 97%, revealed that the relation between cutting responses and input parameters held good for more than 97% and the model was adequate. | Nội dung Text Multi-regression prediction model for surface roughness and tool wear in turning novel aluminum alloy LM6 fly ash composite using response surface and central composite design methodology

Không thể tạo bản xem trước, hãy bấm tải xuống
TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.