In this paper, the thermal properties of GFRP, CFRP, and Carbon and Glass fibers reinforced epoxy hybrid composite will be studied. The composites using are all unidirectional. | Thermal characterization of fiber reinforced polymer composites and hybrid composites International Journal of Mechanical Engineering and Technology IJMET Volume 10 Issue 03 March 2019 pp. 1055 1066 Article ID IJMET_10_03_106 Available online at http ijmet JType IJMET amp VType 10 amp IType 3 ISSN Print 0976-6340 and ISSN Online 0976-6359 IAEME Publication Scopus Indexed THERMAL CHARACTERIZATION OF FIBER REINFORCED POLYMER COMPOSITES AND HYBRID COMPOSITES Bhasker Bommara Dr. M. Devaiah P. Laxmi Reddy M. Ravindra Gandhi Department of Mechanical Engineering Geethanjali College of Engineering and Technology Hyderabad Telangana State India Corresponding Author ABSTRACT Hybrid composite materials are the great potential for engineering material in many applications. Hybrid polymer composite material offers the designer to obtain the required properties in a controlled considerable extent by the choice of fibers and matrix. The properties are tailored in the material by selecting different kinds of fibre incorporated in the same resin matrix. In this paper the thermal properties of GFRP CFRP and Carbon and Glass fibers reinforced epoxy hybrid composite will be studied. The composites using are all uni- directional. The compression moulding technique will be adopted for the fabrication of hybrid composite materials. The thermal properties such as Glass transition temperature Thermal conductivity Specific heat capacity are calculated using Dynamic mechanical Analysis DMA Differential scanning Calorimetry DSC Thermo gravimetric analysis TGA respectively. Key words Hybrid polymer Composites fibers thermal properties compression moulding technique. Cite this Article Bhasker Bommara Dr. M. Devaiah P. Laxmi Reddy M. Ravindra Gandhi Thermal Characterization of Fiber Reinforced Polymer Composites and Hybrid Composites International Journal of Mechanical Engineering and Technology 10 3 2019 pp. 1055 1066. http IJMET JType IJMET .
