The effect of operational parameters on selected tillage tools or tines were studied by using instrumented soilbin at Department of Farm Machinery and Power Engineering, College of Agricultural Engineering, Raichur (Karnataka). The experiment was conducted in sandy clay loam soil to study the effect of variation of forward speed (3, 4 and 5 km/h), operating depth (5, 10 and 15 cm) and type of tools (Sweep-1, Sweep-2 and Shovel-1) on draft, specific draft, soil disturbance parameters and tool width to furrow width ratio. The test was conducted in a 21 m long, 2 m wide and 1 m deep soilbin. |