The complete treatment of colors and hazardous substances at a reasonable cost is of particular interest in the textile industry. In this batch form study, dye solution and textile dyeing wastewater were successfully treated by Fenton technology combining Moving Bed Reactor/Activated carbon (Fenton-MBR/AC) system. The optimum operating conditions including of pH value, of Fe/H2O2 ratio, 25mL of H2O2 (30%) solution, and 200mL of sample were found. After 60 min, the color removal and efficiency of COD treatment was 94% and 89%, respectively. Besides, the remaining COD after treatment was 97 mg/L. This value meets the requirements for effluent according to the national technical regulations on wastewater quality (QCVN 13:2015/BTNMT). |
