A duplex oxide cohesive zone model to simulate intergranular stress corrosion cracking

The model showed matching results for all duplex oxide combinations in varying stress, but the inner logarithmical oxide gave higher crack growth rates than the power law. The power law with the thicker inner oxide showed good results for the change of stress intensity factor and gave the best results when the yield stress was varied. Grain misorientation effect was higher for the duplex oxides with thicker outer oxides. |

Không thể tạo bản xem trước, hãy bấm tải xuống
TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.