Hệ thống cảnh báo tình trạng quá nhiệt máy biến áp phân phối ứng dụng công nghệ IoTs

Mục tiêu bài viết này là thiết kế một hệ thống Internet vạn vật IoTs (Internet of Things) có thể phát hiện sự cố xảy ra trên các máy biến áp phân phối dựa vào nhiệt độ hoạt động trên thân máy. Để xây dựng hệ thống, trước tiên, một thiết bị đo nhiệt độ thân máy được thiết kế sử dụng cảm biến nhiệt độ hồng ngoại không tiếp xúc. | TNU Journal of Science and Technology 228 02 144 - 151 WARNING SYSTEM FOR OVERHEATED DISTRIBUTION TRANSFORMERS USING IOTS TECHNOLOGY Nguyen Van Khanh1 Tran Quang Vinh2 Nguyen Duc Toan1 Nguyen Tri Loc1 Nguyen Chi Ngon1 1 Can Tho University 2Vinh Long University of Technology Education ARTICLE INFO ABSTRACT Received 07 12 2022 The aim of this paper is to design an IoTs Internet of Things system that can detect failures on distribution transformers based on the Revised 11 01 2023 temperature of their body. To build the system at first a device is Published 11 01 2023 deployed to measure the temperature outside the transformer using a non-contact infrared temperature sensor. Then experiment is KEYWORDS conducted to collect the temperature data of operating transformers to find out a correlation between the outside temperature and actual AWS IoT Core temperature of them to conduct suitable warning mechanism. Next Infrared temperature sensor Amazon AWS IoT Core service is utilized to connect measuring devices and store their data in a database. Finally a web-based Distribution transformer application is developed to monitor and alert the abnormal states of IoTs transformers. The experimental results indicate that the system can ESP32 MCU measure transformer temperature based on the heat on their body the web-based application can observe transformer temperature in real- time and notify when a problem is occured. HỆ THỐNG CẢNH BÁO TÌNH TRẠNG QUÁ NHIỆT MÁY BIẾN ÁP PHÂN PHỐI ỨNG DỤNG CÔNG NGHỆ IOTS Nguyễn Văn Khanh1 Trần Quang Vinh2 Nguyễn Đức Toàn1 Nguyễn Trí Lộc1 Nguyễn Chí Ngôn1 1 Trường Đại học Cần Thơ 2Trường Đại học Sư phạm Kỹ thuật Vĩnh Long THÔNG TIN BÀI BÁO TÓM TẮT Ngày nhận bài 07 12 2022 Mục tiêu bài báo này là thiết kế một hệ thống Internet vạn vật IoTs Internet of Things có thể phát hiện sự cố xảy ra trên các máy biến áp Ngày hoàn thiện 11 01 2023 phân phối dựa vào nhiệt độ hoạt động trên thân máy. Để xây dựng hệ Ngày đăng 11 01 2023 thống trước tiên một thiết

Không thể tạo bản xem trước, hãy bấm tải xuống
TÀI LIỆU MỚI ĐĂNG
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.