Electric machines have dangerous live and rotaling parts and may hot surfaces. All operations serving transport, storage, installation, connection, commissioning. operation and mailntenance shall be canied uot by responsible skilled persons. | Manual for Induction Motors and Generators a mi A Manual for Induction Motors and Generators Safety Instructions AMA AMB AMG AMH AMK AMZ HXR M3BM M3GM 1. General General safety regulations specific agreements made for each work site and safety precautions shown in this document must be observed at all times. 2. Intended use Electric machines have dangerous live and rotating parts and may have hot surfaces. All operations serving transport storage installation connection commissioning operation and maintenance shall be carried out by responsible skilled persons in conformity with EN 50 110-1 DIN VDE 0105 IEC 60364 . Improper handling may cause serious personal injury and damage to property. Danger These machines are intended for industrial and commercial installations as components as defined in the Machinery Directive MD 98 37 EC. Commissioning is prohibited until conformity of the end product with this directive has been established follow particular local safety and installation rules as for example EN 60204 . These machines comply with the harmonized series of standards EN 60034 DIN VDE 0530. Their use in explosive atmosphere is prohibited unless they are expressly designed for such use follow additional instructions . On no account use degrees of protection IP23 outdoors. Air-cooled models are typically designed for ambient temperatures of -20 C up to 40 C and altitudes of 1000 m above sea level. Ambient temperature for air- water-cooled models should be not less than 5 C for sleeve-bearing machines see manufacturer s documentation . By all means take note of deviating information on the rating plate. Field conditions must conform to all rating plate markings. 3. Transport storage Immediately report damage established after delivery to transport company. Stop commissioning if necessary. Lifting eyes are dimensioned for the weight of the machine do not apply extra loads. Ensure the use of correct lifting eyes. If necessary use suitable adequately dimensioned .
