Tham khảo tài liệu 'cisco network part 108', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | chuyển sang trạng thái Established và láng giềng router ospf 1 log-adjacency-changes network area 0 network area 0 network area 0 network area 0 router bgp 30 no synchronization redistribute ospf 1 neighbor remote-as 100 neighbor route-map PREF in neighbor filter-list 1 out neighbor remote-as 30 neighbor next-hop-self ip classless no ip http server ip as-path access-list 1 permit A ip as-path access-list 2 permit _50 route-map PREF permit 10 match as-path 2 set local-preference 200 route-map PREF permit 20 line con 0 logging synchronous transport input none line aux 0 line vty 0 4 login end R6 show run Building configuration. Current configuration version service timestamps debug uptime service timestamps log uptime no service password-encryption hostname R6 ip subnet-zero no ip domain-lookup interface LoopbackO ip address interface Loopbackl ip address interface Loopback2 ip address interface Ethernet0 ip address interface Serial0 ip address no fair-queue clockrate 64000 interface Serial1 no ip address shutdown router ospf 1 log-adjacency-changes network area 0 network area 0 network area 0 network area 0 router bgp 30 no synchronization redistribute ospf 1 neighbor remote-as 100 neighbor route-map PREF in neighbor filter-list 1 out neighbor remote-as 30 neighbor next-hop-self ip classless no ip http server ip as-path access-list 1 permit A ip as-path access-list 2 permit _75 route-map PREF permit 10 match as-path 2 set local-preference 400 line con 0 logging synchronous transport input none line aux 0 line vty 0 4 login end Ta xem kết .
