2010 Infiniti M35/M45 Owner's Manual P2

Use the following procedure to remove the adjustable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat. 4. Store the headrest properly in a secure place so it is not loose in the vehicle. 5. Install and properly adjust the headrest before an occupant uses the seating position. Install 1. Align the headrest stalks with the holes in the seat. Make sure that the headrest is facing the correct direction. The stalk with the adjustment notches 1 must be installed in the hole with the lock knob. | To lower push and hold the lock knob and push the headrest down. Removal Install Use the following procedure to remove the adjustable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat. 4. Store the headrest properly in a secure place so it is not loose in the vehicle. 5. Install and properly adjust the headrest before an occupant uses the seating position. 1. Align the headrest stalks with the holes in the seat. Make sure that the headrest is facing the correct direction. The stalk with the adjustment notches must be installed in the hole with the lock knob . 2. Push and hold the lock knob and push the headrest down. 3. Properly adjust the headrest before an occupant uses the seating position. 1-10 Safety Seats seat belts and supplemental restraint system ARMREST Rear armrest Front armrest Pull the lever up and slide the driver s or passenger s armrest forward and backward. Slide the armrest to the original position when using the front cup holders. Pull the armrest down until it is horizontal. Trunk pass-through The rear center seatback can be folded to allow trunk access from inside of the vehicle. To access the trunk pull down the rear center armrest and pull out the trunk pass-through lid . To lock the lid use the mechanical key and turn it to the LOCK position . To unlock turn the mechanical key to the UNLOCK position @. For the mechanical key usage see KEYS in the 3. Pre-driving checks and adjustments section. Make sure that the mechanical key is removed from the trunk pass-through lid key cylinder before opening or closing the lid. Otherwise the lid and the rear armrest may be damaged. Safety Seats seat belts and supplemental restraint system 1-11 SEAT BELTS PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly adjusted and you are sitting upright and well back in your seat with both feet on the floor your chances of being injured or killed in an accident and .

Không thể tạo bản xem trước, hãy bấm tải xuống
TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.