220 7 Optimizing the Hyper-V Host Ser ver and Guest Sessions as shown in Figure . Figure shows a sample capture with a DNS capture filter applied and all RDP packets color-coded in red using a color filter. FIGURE Choosing to copy a cell as a filter. FIGURE Sample capture with red-highlighted filtered data. Download at Using Capacity-Analysis Tools 221 To remove a filter, just highlight the correct filter from the Filter menu and select Remove Filter, click the Remove button in the Capture Filter pane, or press the Ctrl+Shift+Enter keys simultaneously. NOTE Removing a filter does not remove it from the filter list. It just removes. | 220 7 Optimizing the Hyper-V Host Server and Guest Sessions as shown in Figure . Figure shows a sample capture with a DNS capture filter applied and all RDP packets color-coded in red using a color filter. FIGURE Choosing to copy a cell as a filter. FIGURE Sample capture with red-highlighted filtered data. Download at Using Capacity-Analysis Tools 221 To remove a filter just highlight the correct filter from the Filter menu and select Remove Filter click the Remove button in the Capture Filter pane or press the Ctrl Shift Enter keys simultaneously. NOTE Removing a filter does not remove it from the filter list. It just removes it from being applied. Capturing Network Traffic Between Computers As outlined previously Network Monitor includes the ability to capture wireless remote local area network LAN and wide area network WAN traffic using a remote agent. In some cases network administrators want to diagnose or monitor a conversation between two computers. The steps necessary to monitor traffic between two different computers are outlined in the following list. To capture network traffic between two different computers using IPv4 source and destination addresses as shown in Figure complete the following steps 1. In Network Monitor click the Create a New Capture Tab button on the left. 2. Click the Filter menu select Capture Filter Load Filter Standard Filters. 3. Select IPv4SourceandDestination. 4. Edit the filter to specify the IP addresses that should be filtered in the Capture Filter window for example and . FIGURE Network Monitor capture of network traffic between two IP addresses. 7 Download at 222 7 Optimizing the Hyper-V Host Server and Guest Sessions 5. Click the Apply button in the Capture Filter pane. 6. Click the Play button on the main Network Monitor menu bar or press the F10 key to start the capture. Parsing Captured Network Traffic Data Parsing captured data allows .
