Tham khảo tài liệu 'professional information technology-programming book part 164', công nghệ thông tin, kỹ thuật lập trình phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | Configure the Winsock Buffer Size pcAnywhere All Windows Popular Use this registry item to set the size in bytes of TCP s Winsock buffer. Using a large value may increase the throughput of connections where the delay is large in relation to the bandwidth. This includes Internet ISDN RAS dial-up networking WAN and satellite connections. Compatibility with the OnNet TCP IP Stack pcAnywhere All Windows This registry item resolves an issue where pcAnywhere displayed the wrong host IP address when using FTP s OnNet TCP IP stack. Prompt for TCP IP Host pcAnywhere All Windows This registry item allows a TCP IP remote to specify an IP address or name when you leave the Host To Connect To field blank. Adapter Binding Mode pcAnywhere All Windows This registry item allows a waiting host to bind to a new adapter such as a dial-up adapter without reinitializing the host. TCP IP Host Binding Mode pcAnywhere All Windows This registry item allows you to specify whether the host will wait on the first TCP IP address given by the operating system or whether it will wait on the TCP IP index as indicated by TCPIPHostAddressIndex. Specify Host Mode TCP IP Address pcAnywhere All Windows This registry item allows you to specify which TCP IP address index the host will wait on. Multicast Packet Delay pcAnywhere All Windows This sets the delay in milliseconds between each send. This is useful if multicast error correction is disabled. Configure the Multicast Data Port pcAnywhere All Windows This setting selects the port that the multicast data is sent to. Multicast Error Correction pcAnywhere All Windows This sets the level of error correction used on the host. The host specifies which level of error correction the remotes will use. Multicast Adapter Selection pcAnywhere All Windows Use this registry item for a multihomed multicast host that is not binding to the correct network card. This can be why none of the remotes receive the multicast packets. Configure Multicast Send and .
