ADC‘s innovative TracerLight® Connector Identification System offers a quick and accurate method of identifying the termination point of optical patch cords. Each end of a TracerLight patch cord features a flashing light source allowing technicians to visually trace individual patch cords from one end to the other without pulling or affecting the patch cord. | TracerLight Connector Identification System SPEC SHEET ADC s innovative TracerLight Connector Identification System offers a quick and accurate method of identifying the termination point of optical patch cords. Each end of a TracerLight patch cord features a flashing light source allowing technicians to visually trace individual patch cords from one end to the other without pulling or affecting the patch cord. The TracerLight power source is inserted into the TracerLight component on one end of the patch cord. This causes the LED on each end to begin flashing rapidly. As a result the distant end of the patch cord can be quickly and easily identified without interruption of service. The compact power source is composed of a lightweight plastic flashlight body featuring two AA batteries and a printed circuit board PCB . It provides approximately 80 hours of continuous service and features 1-hour auto-off. The end of battery life is indicated by a slowing of the blink rate. Features Dramatically minimizes the risk of taking the wrong fiber out of service Improves system turn-up speed and accuracy TracerLight patch cords meet all optical performance criteria of standard ADC patch cords Ideally suited for Central Offices Data Centers and cross-connect patching 72 reduction in jumper turn-up times and 13 reduction in accidental down-time. TracerLight pays for itself again and again Available in any standard length or connector style Same functions features and stringent environmental standards as ADC s standard patch cords Installed in the same manner as ADC s standard patch cords Easily pulled through ADC s FiberGuide fiber cable management system 1-952-938-8080 1-800-366-3891 TracerLight i. Connector Identification System Specifications OPTICAL PERFORMANCE Singlemode Ultra Polish Connectors UPC SC FC LC Insertion Loss 1310 and 1550 nm dB max. dB typical dB max. dB typical dB max. dB typical Return Loss 1310 and 1550 nm -57 dB min.
