ELECTRICAL Contact Resistance: Ohm maximum (initial) Ohm maximum (after life cycling) Ohm maximum (after salt spray) Insulation Resistance: 10,000 megohms minimum (initial) 1,000 megohms minimum (after moisture resistance test) Dielectric Withstanding: Voltage: 500 Vac Contact Rating: Maximum: 100 mA + 130 Vdc; Minimum: -40 dBm MECHANICAL Mechanical Shock: Per MIL-STD-202F, Method 213B, test condition H Vibration: MIL-STD-1344, Method 2005, test condition I Insertion Force: 7 lbs. ( kg) maximum Withdrawal Force: lbs. (.679 kg) minimum Life: 20,000 insertion/withdrawal cycles minimum ENVIRONMENTAL Operating Temp: -40°C to 65°C Storage Temp: -55°C to 85°C Thermal Shock: Per MIL-STD-202F, Method 107G, test condition A Operating Humidity: 0% to 95% (no condensation) Storage Humidity: 0% to 95% (no condensation) Salt Spray:. | Drawings and Specifications Patching ProPatch Programmable Longframe Audio Products .172 Bantam Audio Video Products .175 ICON Systems I-W Wall-Mount Bulkhead F Connector Bulkhead Wall-Mount Audio Products .191 Connectors and Accessories Component Audio MUSA-Series jacks and Video Products .200 75 Ohm Connectors .206 ProAx Triaxial Camera RF Signal Management RF Worx SignalOn RF Worx Satellite Splitters RF Worx SignalOn 1-952-938-8080 -800-366-3891 HM Drawings and Specifications KX ProPatch Programmable Series PPP1248 Chassis and AMI-BAN Module in all Chassis Configurations ELECTRICAL Contact Resistance Insulation Resistance Broadcast Products Dielectric Withstanding Contact Rating MECHANICAL Mechanical Shock Vibration Insertion Force Withdrawal Force Life ENVIRONMENTAL Operating Temp Storage Temp Thermal Shock Operating Humidity Storage Humidity Salt Spray Moisture Resistance MATERIALS Chassis Frame Bantam Frame Springs Contacts PC Boards Sockets Switches Ohm maximum initial Ohm maximum after life cycling Ohm maximum after salt spray 10 000 megohms minimum initial 1 000 megohms minimum after moisture resistance test Voltage 500 Vac Maximum 100 mA 130 Vdc Minimum -40 dBm Per MIL-STD-202F Method 213B test condition H MIL-STD-1344 Method 2005 test condition I 7 lbs. kg maximum lbs. .679 kg minimum 20 000 insertion withdrawal cycles minimum -40 C to 65 C -55 C to 85 C Per MIL-STD-202F Method 107G test condition A 0 to 95 no condensation 0 to 95 no condensation Per MIL-STD-202F Method 101D Per MIL-STD-202F Method 106E Steel zinc plated with electroless nickel plating Steel with black zinc chromate plating Unreinforced polyetherimide resin rated UL 94-V0 for flammability Nickel-silver WECO No. 1 gold crossbar alloy welded to springs FR-4 Phosper bronze 30 micro inches gold on contact
