This standard is issued under the fixed designation C 511; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. | Designation C 511 98 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr. West Conshohocken PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for Moist Cabinets Moist Rooms and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes1 This standard is issued under the fixed designation c 511 the number immediately following the designation indicates the year of original adoption or in the case of revision the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon e indicates an editorial change since the last revision or reapproval. 1. Scope This specification covers rcquircmcnis fc i Ii-ioiss cabL nets moist rooms and water storage tanks used for storage of paste mortar and concrete test specimens. Values in SI units shall be obtained by measurement in SI units or by appropriate conversion using the Rules for Conversion and rounding given in Standard IEEE ASTM SI 10 of measurements made in other units. This standard does not purport to address all of the safety concerns if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2. Referenced Documents ASTM Standards C911 Specification for Ọmcklímc. Hvdraacd Lime and Limestone for Chemical Uses2 E 77 Test Methods for the Inspection and Veri ní n of Thermometers3 IEEE ASTM SI 10 Standard for Use of the International System of Units SI The Modern Metric System4 3. Terminology De nitions moist cabinet n a compartmcmcd s agc En íiíy of moderate dimensions with controlled temperature and relative humidity. moist room n a wvalk-in otorage íacũity with controlled temperature and relative humidity commonly called a fog room when the prescribed relative humidity is achieved by the atomization of water. 4. Requirements