Designed and diagrammed by Andy Carpenter (1998). Use a sheet of strong white paper (white on both sides) with dimensions of 1: . A sheet 30cm by 54cm will produce a model approximately 14cm by 9cm. Wet fold the paper for best results. | Sheep Designed and diagrammed by Andy Carpenter 1998 . Use a sheet of strong white paper white on both sides with dimensions of 1 . A sheet 30cm by 54cm will produce a model approximately 14cm by 9cm. Wet fold the paper for best results. 3. 5. Rabbit ear the horn thin the vertical raw edge from head to front legs then sink fold the front legs with two layers of step 3 are hidden by another layer of paper. paper on each fold to form the back leg. Repeat behind. 6. Enlarged view. Reverse fold both sides of the back leg. The fold on the right trisects the angle. Repeat behind. 7. Repeat behind. 9. Repeat behind. 8. Front left side of model cut away. Rabbit ear fold both front one shown is the far side front leg. Copyright Andy Carpenter 1998 10. 12. Like this. 11. Repeat for all 4 feet. 13. Push the face down and pull the back of the head up. Fold to shape head and horns. Repeat behind. to shape the body. 16. The final sheep. 14. Repeatedly crimp fold to curve the horn. Repeat behind. Repeat behind. Copyright Andy Carpenter 1998
