Tài liệu tham khảo về cách xếp Dollar Bill Enterpri$e . | Dollar Bill Enterprise By Perry Bailey Copy-right 1999 the bill back together while making the folds shown on the top layer this should result in a 90 degree turn when collapsed 5. Now ignore the long piece facing away from you grasp the outerthree layers of the bill and pull them out so that you can see 4 eights of the bill. 6. Now this is a little more difficult what you do is you fold the top part forward toward the long part of the bill while bringing the bottom of the model together. Note this will not close the bottom of the completely see next diagram. 7. This should resemble at least a little the three dimension object you now hold if you ignore every thing but the very back end of it. 8. Fold the sides out one more eighth on each side while folding the flap downwards. 10. This is easy just fold under on both sides. 9. Easily the most confusing move of this model is this one what you do is to slide a little of the paper 1 layer forward a bit mainly towards the center of the model. Later this will be used to create domes at the front of the nacelles. 11. Now you have to fold the paper underneath or there will be less nacelle and too much .
