ADC’s FL1000-K is designed for use in environmentally unfriendly locations. The wall mount box is classified as a NEMA 4x, ideal for manufacturing environments that have airborne particles. The box is constructed from heavy gauge aluminum and painted with a faderesistant finish. Four 1-inch holes are equipped with hole plugs factory-installed, eliminating the need for the craftsperson to cut any entry or exit holes in the box | COPPER AND FIBER BUILDING ENTRANCE TERMINALS 1st Edition Building Entrance Terminals Page 4 Page 9 Fiber Wall Boxes. Protection Devices. 1-952-938-8080 1-800-366-3891 Building Entrance Terminals Fiber Wall Boxes NEMA 4x-Classified Wall Mount Box Building Entrance Terminals ADC s FL1000-K is designed for use in environmentally unfriendly locations. The wall mount box is classified as a NEMA 4x ideal for manufacturing environments that have airborne particles. The box is constructed from heavy gauge aluminum and painted with a faderesistant finish. Four 1-inch holes are equipped with hole plugs factory-installed eliminating the need for the craftsperson to cut any entry or exit holes in the box. It is recommended that the FL1000-K be used with multifiber cable assemblies for both the incoming and exiting fiber. Features Two cable strength member tie-off kits Stainless mounting hardware Tool for removal of front door Dimensions H x W x D 17 x 19 x x x co Compression fitting optional and hole plug factory-installed Ordering information follows on the next page 1-952-938-8080 .
