This case study will allow you to complete a network design, implementation, and troubleshooting project using skills gained in CCNA 2. You will use the skills that you have already developed to use, make, and connect the proper cabling to appropriate devices. | Case Study Routing Cisco Networking Academy Program CCNA 2 Routers and Routing Basics 1-2 CCNA 2 Routers and Routing Basics Copyright 2003 Cisco Systems Inc. Overview and Objectives This case study will allow you to complete a network design implementation and troubleshooting project using skills gained in CCNA 2. You will use the skills that you have already developed to use make and connect the proper cabling to appropriate devices. It is crucial that you read and understand the scenarios to make sure that you are fulfilling all requirements. Each scenario guides you through the proper steps to ensure that your project is completed properly. This case study requires that you accomplish the following Set up the physical layout of the network using the diagram and accompanying narrative Correctly configure the routers with a basic router configuration Set up a TFTP server on one of the workstations Create and apply access control lists on the appropriate router s and interface s Troubleshoot and test all connectivity and access control lists Provide detailed documentation in a prescribed form listed in the deliverables section Copyright 2003 Cisco Systems Inc. Case Study Routing .
