Hay nhất của tất cả các, xây dựng hệ thống chính mình, bạn trở nên rất quen thuộc với hệ thống đó và với các máy tính nói chung. Nếu bạn giải quyết những dự án xây dựng máy tính của bạn? Vâng, không có lý do để không. Thậm chí nếu bạn không biết gì về máy vi tính, nếu bạn có | Audio Cable Usually supplied with the CD-ROM it connects your CD-ROM to your sound card directly. Screws Makes sure you have enough screws. Usually an ample amount is supplied with your case. Make sure the screws are the right size. There are different sizes used for connecting card than for connecting drives and if you try using a large screw on the drive you ll crack the drive. System Disk Make sure you have a system disk setup and ready to use. You can make one for whatever operating system you plan on using. If you have another machine already running use it to make a system disk. Hopefully you are using Windows 98 or better since it makes CD-ROM setup later in this tutorial much easier. That was a brief overview of the hardware scene for you and hopefully it serves as some advice for collecting parts to build your PC. There is no way I can cover all brands of make any solid recommendations as to manufacturer in this tutorial so much of that research would need to be done separately. Now we will move into some actual assembly steps. This e-book is copyright to Glyn Williams. If you have purchased this book from elsewhere please e- mail glyn@ for a reward STEP 2 Remove Case Cover This is a very easy step. Basically you are just taking the cover off your new case. If you have a plain jane case you take a screwdriver and remove the four or six screws located around the edge on the back of your case. Hang on to these screws and put them in a place where they will not be scattered and can be easily found. Once they are removed the entire case cover comes off in one piece. With this design the front of the case does not move. Only the top and sides come off as a cover. In some newer cases you may have to yank the front cover off and then unscrew the case sides from the front. If you have a newer more expensive case it may come apart differently. The manufacturers of better made cases have gone to a screwless design. With this design you usually .
