Bước 12: Một điều cần lưu ý, và điều này là một ví dụ tốt là có thể chỉnh sửa 3D sau khi thực tế, là xiên màu vàng trên các chữ cái CS5. Tôi quyết định ở bên phải đó ở cuối để giúp xác định các chữ cái và để phân biệt chúng từ phía sau. Tất cả những gì bạn cần làm là xác định vị trí các lưới trong phần Vật liệu 3D của bảng điều khiển và click vào R ở phía dưới của bảng điều khiển. . | 3D in Photoshop Step 11 The extrude sides are still gray by default. Simply go into the Layers panel and double-click on the extrusion texture layer and fill with the same yellow color from before. Step 12 One thing to note and this is a good example of being able to edit 3D after the fact is the yellow bevels on the CS5 letters. I decided on that right at the end to help define the letters more and to differentiate them from the background. All you do is locate the mesh in the Materials section of the 3D panel and click on the R at the bottom of the panel. Then go into the Materials section of the Repoussé panel and click on the Side menu and choose a yellow texture from the list. Click OK Step 13 With the elements created we can now bring them together. We already have the Repoussé letter in the layout so go and get the CS5 object and bring that into the layout and position just above the scattered letters. Next bring in the yellow cords. Then make a couple of duplicates of this layer so we can add them in a couple places. 138 Adobe Repoussé with Corey Barker Step 14 At this point I am looking at about seven 3D layers. In order to take advantage of reflections and shadows we need to merge all of these 3D layers into one. I would recommend merging two layers positioning the newly merged item then doing the next. Items will shift around greatly as you merge so be mindful that some objects are hiding behind others. Step 15 When you are done merging you are going to need to make sure all the visible surfaces are going to be reflective. Open the 3D panel and go to the Materials section. At this point the list will be long but you will need to make sure at least that all the Front Inflation Materials and the Extrusion Materials reflection settings are at 25 . This would be a good time to save Productivity Tip Here we have the elements coming together at this angle of view. If you need to move around to find other shapes I would save this angle of view so you can always
