Độ cao phía sau hoàn thành trông giống như dưới cùng của hình 10,21. 6. Bạn cần phải lưu UCS bạn sử dụng để làm việc trên độ cao này để bạn có thể nhanh chóng trở lại với nó trong tương lai, từ WCS hoặc từ bất kỳ UCS khác mà bạn có thể được. Nhập UCS ↵ ↵. Đối với các tên UCS, nhập | Using Other Types of Dimensions 4 8 7 NOTE Most of the commands used for dimensioning are prefaced with a dim when you enter them at the command line that is the name of the command. For example when you click the Radius button on the Dimension toolbar or choose Dimension Radius from the menu bar you see _dimradius in the Command window to let you know that you have started the Dimradius command. You can also start this command by entering dimradiusJ or draJ the command alias . 3. Click the inside arc of the balcony a slight distance above the midpoint. The radial dimension appears in dashed form. Where you pick the arc determines its angle of orientation. The dimension text then stays attached to the cursor see Figure . FIGURE The radial dimension initially positioned in the arc 4. Notice that the tick mark used for linear dimensions is used here also. You should have an arrowhead for the radial dimension. Press Esc to cancel the command. You ll have to alter the dimension style to specify an arrowhead for radial dimensions. 4 8 8 Chapter 12 Dimensioning a Drawing Setting Up Parent and Child Dimensioning Styles The DimPlan dimension style that you set up at the beginning of this chapter applies to all dimensions and is called the parent dimension style. But you can change settings in this dimension style for particular types of dimensions such as the radial type for example. This makes a child dimension style. The child version is based on the parent version but it has a few settings that are different. In this way all your dimensions will be made using the DimPlan dimension style but radial dimensions will use a child version of the style. Once you create a child dimension style from the parent style you refer to both styles by the same name and you call them a dimension style family. Follow these steps to set up a child dimension for radial dimensions 1. Click the Dimension Style button on the Dimension toolbar to open the Dimension Style Manager .
