Thêm một máy ghi khu vực, bằng cách chọn khu vực, cách nhấn vào "Record Add, và chọn" Thêm máy (A) "từ nút pop-up. 5 Sử dụng các cài đặt sau, chọn hồ sơ máy là dưới cái tên vùng để chỉnh sửa các bản ghi, và nhấp vào Lưu khi hoàn tất.  Máy tên: myserver  Địa chỉ IP: 6 Sử dụng các cài đặt sau, | 4 5 6 7 8 9 1 2 3 4 Add a machine record to the zone by selecting the zone clicking Add Record and selecting Add Machine A from the pop-up button. Using the following settings select the machine record which is under the zone name to edit the record and clicking Save when finished. Machine name myserver IP Address Using the following settings continue to add machines to the zone. For example to add a printer click the Add button specify values for the printer then click OK IP address Name laserprinter_2000 Set the server to look outside the server for any domain name it doesn t control by clicking Settings. In the Forwarder IP Addresses list click the Add button to add the DNS addresses provided by the ISP. Click Save then click Start DNS. Step 8 Set up DHCP service This step sets up a DHCP server that provides employee computers with dynamic IP addresses as well as the identity of the DNS LDAP and WINS servers they should use. When a client computer s search policy is set to Automatic using the Directory Utility application on the client computer the identity of the DNS LDAP and WINS servers is supplied when an IP address is supplied. In Server Admin make sure DNS is running. Select DHCP in the service list. Click Subnets. Click the Add button to define the range of addresses to dynamically assign. The range should be large enough to accommodate current and future client computers. Make sure you exclude some addresses at the start or end of the range so they re reserved for devices that need static IP addresses or for VPN users. Here are some sample values Subnet Mask Starting IP Address Ending IP Address Network Interface en1 Router Chapter 9 Sample Setup 193 5 6 7 8 1 2 3 4 1 2 3 4 5 Make sure the DNS pane contains the following values Default Domain Name Servers Click LDAP to configure DHCP to identify the server you re configuring as the source of directory .
