Trớ trêu thay, chế độ này không làm việc cho quan điểm tương đối, đó sẽ là một ứng dụng hoàn hảo cho nó. Nó là để dành cho quan điểm như vậy là xem mục bị hỏng, nơi có độ sâu phải được lựa chọn để cắt. Trong hình 21,22, thông báo thanh công cụ nhỏ trên bản vẽ. | Working with Drawing Views 21 Ironically this mode does not work for the Relative view which would be a perfect application for it. It is intended for views such as the Broken-out Section view where a depth must be selected for the cut. In Figure notice the small toolbar above the drawing view. This toolbar is available while the 3D Drawing View Mode is turned on. Clicking OK on the small toolbar turns off the mode and returns the view to its previous state. FIGURE 3D Drawing View Mode t Qỉiặ View orientation and alignment Although you may have selected the Top view and it displays the correct geometry you may want to spin the view in the plane of the paper or orient it in a particular way. You can do this using two methods. The easiest way to reorient the view is to use the Rotate View tool on the View toolbar. This rotates the view in the plane of the paper much like it rotates the model in 3D. Another option is to select an edge in the view and assign the edge to be either a horizontal or vertical edge. Figure shows how a view can be re-oriented using this tool which is located at Tools Align Drawing View Horizontal or Vertical Edge. Another option for view alignment is to align it relative to another view this involves stacking one view on top of another or placing them side-by-side. You can do this by selecting the second pair of options in the menu shown in Figure Horizontal to Another View and Vertical to Another View. Situations may arise where a view is locked into a particular relationship to another view and you need to disassociate the views. The Break Alignment option which is grayed out in the menu in Figure serves that purpose. Default Alignment resets a view to its original orientation and alignment if it has been altered. 637 Part V Creating Drawings FIGURE Rotating a drawing view to align an edge Selected edge Using Display Options in Views Some important display options and settings are not listed in Tools .
