DesignModeler có hai chế độ chính hoạt động, và bạn sẽ phải chuyển đổi giữa chúng như bạn xây dựng mô hình của bạn. Trong chế độ mô hình hóa, Tree View được hiển thị, như trong hình ở trên cùng của cửa sổ chứa các menu và thanh công cụ khác nhau. | Tutorial 3 Process Injection Mixing Pipe Setting up Inflation The velocity gradients near the pipe wall surfaces can vary significantly so it is advisable to apply inflation in these areas. 1. Click on Inflation in the Tree View. 2. In the Details View check that Number of Inflated Layers is set to 5. 3. Leave the other settings as their default values. 4. In the Tree View right-click on Inflation and select Insert Inflated Boundary. 5. Click on Default 2D Region in the Tree View to select the faces which are in the Default 2D Region for the Inflated Boundary. Click on Apply in the Details View. 6. Leave Maximum Thickness as the default setting. Generating the Volume Mesh Finally you can generate the volume mesh. 1. Right-click on Mesh in the Tree View and select Generate Volume Mesh. 2. Save the GTM File as . The mesh is now complete. 1. Select File Save to save the CFX-Mesh database. 2. Switch to the Project Page using the tabs at the top of the window and choose File Save to save the project. 40 CFX-Mesh Tutorials. . IP Inc. Section 2 Mesh Generation If you want to continue by working through the CFX-5 example Tutorial 3 Flow in a Process Injection Mixing Pipe using the newly-generated mesh and have in ANSYS Workbench installed on your machine then follow these steps 1. On the Project Page a new entry will have appeared when you generated the file Advanced CFD. Under this entry double-click on to open up CFX-Pre. 2. Once CFX-Pre has opened choose File Save Simulation As. to save the simulation as InjectMixer. 3. Work through the tutorial missing out the instructions in the sections Creating a New Simulation and Importing a Mesh . If you do not have in ANSYS Workbench installed or do not want to work through the CFX-5 example then 1. Exit from ANSYS Workbench by selecting File Exit. CFX-Mesh Tutorials. . 5A5 IP Inc. 41 .
