EX4500 chuyển mạch có giao diện sử dụng các loại cáp mạng. Để được hướng dẫn về việc kết nối chuyển sang một mạng lưới cho out-of-band quản lý bằng cách sử dụng một cáp Ethernet với một đầu nối RJ-45, xem "Kết nối chuyển mạch dòng EX Mạng Quản lý" trên trang 133. | Complete Hardware Guide for EX4500 Ethernet Switches 82 Copyright 2011 Juniper Networks Inc. CHAPTER 6 Cable Requirements Network Cable Specifications for EX4500 Switches on page 83 Network Cable Specifications for EX4500 Switches EX4500 switches have interfaces that use various types of network cables. For instructions on connecting the switch to a network for out-of-band management using an Ethernet cable with an RJ-45 connector see Connecting an EX Series Switch to a Network for Out-of-Band Management on page 133. For instructions on connecting the switch to a management console using an Ethernet cable with an RJ-45 connector see Connecting an EX Series Switch to a Management Console on page 134. Related Documentation Planning EX4200 and EX4500 Virtual Chassis on page 89 Virtual Chassis Ports Connector Pinout Information for EX4500 Switches on page 45 Management Port Connector Pinout Information for an EX4500 Switch on page 43 Console Port Connector Pinout Information for an EX Series Switch on page 42 Front Panel of an EX4500 Switch on page 11 Copyright 2011 Juniper Networks Inc. 83 Complete Hardware Guide for EX4500 Ethernet Switches 84 Copyright 2011 Juniper Networks .
