Sử dụng địa chỉ này để xác định xem các DBS 824 hệ thống sẽ kiểm soát dòng chảy của dữ liệu giữa nó và các thiết bị kết nối vào cổng bảo trì nối tiếp (nếu kích hoạt địa chỉ này) là một chuyển đổi phần mềm sẽ tạm thời dừng lại dòng chảy của dữ liệu khi bộ đệm của bộ nhớ thiết bị | Maintenance Serial Port Flow Control XON XOFF FF1 Maintenance Serial Port Flow Control XON I XOFF Software Version CPC-S and CPC-M Version 1 0 and higher Address FF1 2 9 6 0 or 1 Description Use this address to determine whether the DBS 824 system will control the flow of data between it and the device connected to the Maintenance serial port if activated in this address is a software switch that will temporarily stop the flow of data when the device s memory buffer receives more data than it can process and resume the flow when the buffer empties should be deactivated default setting if a flow control mechanism is present elsewhere in the interface i e in the printer or RTS and CTS lines A flow control mechanism should always be present in order to prevent data from being lost during transmission FF1 2 9 6 0 or 1 0 Tur ns off XON OFF 824 software does not control data flOw 1 Tums on XON XOFF 824 software controls data flow Notes DBS Buffer Size The size of the DBS 824 buffer for maintenance data is 1 000 bytes This is the maximum amount of data that the system can hold while the device is emptying its buffer l-76 DBS 824-l O-400 Issued 3 1 95 FF1 Automatic Night 1 Mode Start Time System Timers Automatic Night 1 Mode Start Time Software Version CPC-S and CPC-M Version 1 0 and higher Address FF1 3 1 0000-2359 Description This option sets a time for the DBS 824 to automatically switch from Day to Night 1 mode This program uses the 24-hour time format. Programming To set the automatic Night 1 mode start time FF1 3 1 0000-2359 Night 1 Mode Start Time in format To disable the automatic Night 1 mode start time FF1 3 1 CONF ON OFF Related Programming Time Setting FF1 1 2 HHMM Automatic Day Mode Start Time FF1 3 25 HHMM Automatic Night 2 Mode Start Time FF1 3 29 HHMM Notes Interaction with the System Clock Automatic Night 1 start time depends on the accuracy of the DBS 824 clock issued 3 1 95 DBS 824-l O-400 l-77 Attendant Hold Recall Timer for CO Calls FF1 Attendant Hold
