Tham khảo tài liệu 'using samba-3. configuring windows clients-p2', công nghệ thông tin, hệ điều hành phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | you need to press the Add button and then select Workstation Service as shown in Figure . Figure Select Network Service dialog box Configuring TCP IP After you ve installed the Workstation service return to the Protocols tab and select the TCP IP Protocol entry in the window. Then click the Properties button below the window. The Microsoft TCP IP Protocol panel will be displayed. There are five tabs on the Windows NT panel and like Windows 95 98 you will need to work on three of them IP address DNS WINS address IP Address tab The IP Address tab is shown in Figure . Figure Microsoft TCP IP Properties for Windows NT Select the Specify an IP address radio button and enter the computer s address and subnet mask in the space provided for the proper adapter Ethernet card . You or your network manager should have selected an address for the client on the same subnet LAN as the Samba server. For example if the server s address is and its network mask you might use the address if it is available for the NT workstation along with the same netmask. If you use DHCP on your network select the Obtain an IP Address from a DHCP server button. If you don t have an IP address to use and you are on a network by yourself steal ours as the . subnet is specifically reserved by the Internic for LANs. If you re not by yourself see your system administrator for some available addresses on your network. The gateway field refers to a machine typically known as a router. If you have routers connecting multiple networks you should put in the IP address of the one on your subnet. DNS tab Next we go to the tab for DNS as shown in Figure . This brings up the DNS panel. Figure The DNS .
