Trong các màn hình được hiển thị trong hình 15-7 và Hình 15-8, wizard sẽ yêu cầu bạn kết nối router của bạn với một máy tính. Để cài đặt thiết bị này một cách chính xác, bạn phải có một kết nối có dây với nó. Sau này, bạn có thể cấu hình các thiết bị chấp nhận khách hàng không dây. | Wireless Access Point Configuration Linksys 300N Access Point 165 In the screens shown in Figure 15-7 and Figure 15-8 the wizard asks you to connect your router to a computer. To install this device correctly you must have a wired connection to it. After this you can configure the device to accept wireless clients. The 300N has the RJ45 ports colored coded for ease of use the port to connect to the modem is blue and the four ports that you can use to connect to devices are yellow. Check with your device to make sure you are plugged into the correct ports. Figure 15-12 Connect the Router to a Computer Now that you have wired the Linksys router to your computer and modem connect the power cord to the router and plug it into the wall as instructed in the screen shown in Figure 15-9. 166 Wireless Access Point Configuration Linksys 300N Access Point Figure 15-13 Connect the Router to a Computer Figure 15-14 Power on the Router At this point the wizard asks for you to check the status of the router to verify that the correct LEDs are lit. At this point if you need to start over or if you need to review your Wireless Access Point Configuration Linksys 300N Access Point 167 steps you can click Review instructions from the screen in Figure 15-10 to start over. If not click Next to continue. The Setup Wizard checks your computer settings so you will see a timer bar appear over the top of the wizard as shown in Figure 15-11. Figure 15-15 Check the Router s Status Figure 15-16 Checking Your Computer s .
