Đang chuẩn bị liên kết để tải về tài liệu:
Fatigue crack growth characteristics of nitrogen-alloyed type 347 stainless steel under operating conditions of a pressurized water reactor

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

The fatigue crack growth behavior of Type 347 (S347) and Type 347N (S347N) stainless steel was evaluated under the operating conditions of a pressurized water reactor (PWR). These two materials showed different fatigue crack growth rates (FCGRs) according to the changes in dissolved oxygen content and frequency. Under the simulated PWR conditions for normal operation, the FCGR of S347N was lower than that of S347 and insensitive to the changes in PWR water conditions. | Fatigue crack growth characteristics of nitrogen-alloyed type 347 stainless steel under operating conditions of a pressurized water reactor

TÀI LIỆU LIÊN QUAN

Fatigue crack growth at the representative zones in friction stir welding of a heat treatable aluminium alloy at 200oC

Fatigue crack growth characteristics of nitrogen-alloyed type 347 stainless steel under operating conditions of a pressurized water reactor

Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment

Dynamic crack propagation in specimens with a surface irregularity

Crack propagations and fatigue characteristics of some handmade papers

Fatigueproperties of a nanocrys talline titanium based bul kmetallic glassy alloy

Fatigue performance of tubular X-joints: Numerical investigation

Simulating fatigue crack growth in spiral bevel gears

Residual strains around cold worked holes from statistical view
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.