Đang chuẩn bị liên kết để tải về tài liệu:
Preparaton of masterbatch containing anti-oxidation additive: effect of carrier resin ratio and additives content

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG Tải xuống

In this article, we investigated effect of carrier resin ratio and anti-oxidation additives content on properties of anti-oxidant additives Masterbatchs (MBs). The characteristics were measured by: melt flow index (MFI), morphology (SEM), tensile strength and elongation at break. The results indicated that: increasing LLDPE content in carrier resin led to decreasing mechanical properties, MFI weren’t uniform in MBs. With 80/20 of LDPE/LLDPE ratio, the tensile strength and elongation at break values were highest (21.0 MPa, 680.5 %). | Preparaton of masterbatch containing anti-oxidation additive: effect of carrier resin ratio and additives content Vietnam Journal of Science and Technology 56 (2A) (2018) 56-62 PREPARATON OF MASTERBATCH CONTAINING ANTI-OXIDATION ADDITIVE: EFFECT OF CARRIER RESIN RATIO AND ADDITIVES CONTENT Duong Thi Thao1, Nguyen Phi Trung1, Hoang Thi Huong1, Tran Vu Thang2, Nguyen Van Khoi2, *, Trịnh Duc Cong2, Hoang Thi Phuong2 1 Institute of Research and Development on Novel Materials, 350 Lac Trung, Hai Ba Trung, Ha Noi 2 Institute of Chemistry, VAST,18 Hoang Quoc Viet, Cau Giay, Ha Noi * Email: khoinguyen56@gmail.com Received: 28 March 2018; Accepted for publication: 10 May 2018 ABSTRACT In this article, we investigated effect of carrier resin ratio and anti-oxidation additives content on properties of anti-oxidant additives Masterbatchs (MBs). The characteristics were measured by: melt flow index (MFI), morphology (SEM), tensile strength and elongation at break. The results indicated that: increasing LLDPE content in carrier resin led to decreasing mechanical properties, MFI weren’t uniform in MBs. With 80/20 of LDPE/LLDPE ratio, the tensile strength and elongation at break values were highest (21.0 MPa, 680.5 %). In addition, when increased anti-oxidant additives content, mechanical properties increased to upper limit value, then decreased. With 25 wt.% of anti-oxidant additives, the tensile strength and elongation at break values were highest (21.0 MPa, 654.7 %), MFI were uniform in MBs (12 g/10 m). SEM images were evidence of greatly distribution in sample containing 25 wt.% additives. Consequently, the 90/10 of LDPE/LLDPE ratio, 25 wt.% anti-oxidant additives were selected to prepare MBs. Keywords: anti-oxidation master batch, carrier resin, LDPE, LLDPE. 1. INTRODUCTION Plastics industry has important role in our life. Plastics products has many advantages: flexible, good mechanical properties, good .