Đang chuẩn bị liên kết để tải về tài liệu:
Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

Effects of graphene oxide content on mechanical, thermal properties and morphology of composite coating based on acrylic emulsion R4152 and graphene oxide (GO) have been investigated. Obtained results showed that GO particles had insignificant effect on adhesion of composite coating but GO improved abrasion resistance of composite coatings. The abrasion durability of coatings increased with GO ratio rising to 0.5 % and then abrasion resistance of coatings decreased with GO ratio continuously growing up. SEM images presented that GO particles dispersed homogenously into polymer matrix if the GO ratio is of 0.5 % wt. While the ratio increased to 1 % wt., the agglomeration of GO particles in composite coating could be seen clearly in SEM images. It is assumed that the abrasion resistance decreased if using the GO ratio more than 0.5 % wt. TGA results also demonstrated the thermal property of GO composite coating was improved than that of neat coating. | Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide

TÀI LIỆU LIÊN QUAN

Effect of temperature on microstructure and mechanical properties of superheater steel pipe in thermal power plant

Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler

Study on the rhelogical, physico mechanical and thermal properties of polyvinylchloride/ wasteg - ypsum polymer composites

Impact of thermal and chemical treatment on the mechanical properties of E110 and E110G cladding tubes

Biodegradable blends of urea plasticized thermoplastic starch (UTPS) and poly(-caprolactone) (PCL): Morphological, rheological, thermal and mechanical properties

Enhancing the mechanical and thermal properties of polypropylene composite by encapsulating styrene acrylonitrile with ammonium polyphosphate

Preparation and investigation of the mechanical and thermal properties of styrene butadiene rubber using dicumyl peroxide as curing agent

Improvement of the mechanical and thermal properties of polyester nonwoven fabrics by PTFE coating

Effect of carbon black powder content on thermal, physical, and mechanical properties of carbon fabric reinforced phenolic composite

Ebook Fundamentals of materials science and engineering (5th edition): Part 2
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.