Đang chuẩn bị liên kết để tải về tài liệu:
Development of a user-friendly guideline for data analysis and sampling design strategy

Within the H2020 INSIDER project, the main objective of work package 3 (WP3) is to draft a sampling guide for initial nuclear site characterization in constraint environments, before decommissioning, based on a statistical approach. | Development of a user-friendly guideline for data analysis and sampling design strategy EPJ Nuclear Sci. Technol. 6 16 2020 Nuclear Sciences Y. Desnoyers and B. Rogiers published by EDP Sciences 2020 amp Technologies https doi.org 10.1051 epjn 2020006 Available online at https www.epj-n.org REGULAR ARTICLE Development of a user-friendly guideline for data analysis and sampling design strategy Yvon Desnoyers1 and Bart Rogiers2 1 Geovariances 49bis avenue Franklin Roosevelt 77210 Avon France 2 SCK CEN ǀ Belgian Nuclear Research Centre Boeretang 200 2400 Mol Belgium Received 23 October 2019 Received in final form 20 January 2020 Accepted 27 January 2020 Abstract. Within the H2020 INSIDER project the main objective of work package 3 WP3 is to draft a sampling guide for initial nuclear site characterization in constraint environments before decommissioning based on a statistical approach. The second task of WP3 aims at developing a strategy for sampling in the field of initial nuclear site characterization in view of decommissioning with the most important goal to guide the end user to appropriate statistical methods including but not limited to those identified during the first overview task to use for data analysis and sampling design. To aid the end user in applying this strategy a user-friendly application for guiding the end user through the contents of the strategy and the initial characterization process is also developed. 1 Introduction and reviewing the feedback from overall uncertainty calculations. The process followed to meet the main The EURATOM work program project INSIDER was WP3 objective consists of four steps launched in June 2017 18 partners from 10 European Status provide an overview of the available sampling countries . It aims at improving the management of design methods and state-of-the-art statistical techniques. contaminated materials arising from decommissioning and Development develop a strategy methodology that dismantling D amp D operations .