Đang chuẩn bị liên kết để tải về tài liệu:
Biomechanical comparison of tenodesis reconstruction for subtalar instability: A finite element analysis

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

There are several types of tenodesis reconstruction designed for subtalar instability. However, no comprehensive comparison has been conducted among these procedures in terms of their correcting power so far. The objective of this study is to evaluate the biomechanical behaviors of 5 representative procedures through finite element analysis. |

TÀI LIỆU LIÊN QUAN

Mono- versus polyaxial locking plates in distal femur fractures – a biomechanical comparison of the Non-Contact-Bridging- (NCB) and the PERILOC-plate

Biomechanical comparison between singlerow with triple-loaded suture anchor and suture-bridge double-row rotator cuff repair

Biomechanical comparison of menisci from different species and artificial constructs

Biomechanical comparison of different combinations of hook and screw in one spine motion unit - an experiment in porcine model

Biomechanical comparison of screw-based zoning of PHILOS and Fx proximal humerus plates

Biomechanical efficacy of AP, PA lag screws and posterior plating for fixation of posterior malleolar fractures: A three dimensional finite element study

báo cáo hóa học:" Comparison of transverse wires and half pins in Taylor Spatial Frame: A biomechanical study"

A biomechanical comparison of two screw fixation methods in a Letenneur type I Hoffa fracture

Height and volume restoration in osteoporotic vertebral compression fractures: A biomechanical comparison of standard balloon kyphoplasty versus Tektona® in a cadaveric fracture model

Reattachment of the flexor and extensor tendons at the epicondyle in elbow instability: A biomechanical comparison of techniques
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.