Đang chuẩn bị liên kết để tải về tài liệu:
Using modified macadamia carbon by H2O2 as adsorbent to remove zinc (Zn 2+) in wastewater

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

Using modified macadamia carbon by H2O2 as adsorbent to remove Zn2+ with H2O2 25% in 48 hours. The Parameters, such as pH, dosage and adsorption time affect the processing ability of modified macadamia carbon H2O2. The maximum removal efficiency of 64.52% was obtained at a pH of 4.5, the processing time is 80 minutes, dosage 1.8 g/L and an initial heavy metal concentration of 25ppm. |

TÀI LIỆU LIÊN QUAN

Properties of polymer-modified cement mortar using pre-enveloping method

Properties of polymer-modified mortars using epoxy and acrylic emulsions

Vanillin conversion by aldol condensation using hydrotalcite mg-al and modified -y zeolite as heterogeneous catalysts

Using modified macadamia carbon by H2O2 as adsorbent to remove zinc (Zn 2+) in wastewater

Removal of cod and ammonium from landfill leachate by using a modified eco-bio-block material in anoxic oxic system

Phosphate removal from aqueous solution by using modified sludge from water treatment plant

Extracting iron from red mud (Tan Rai, Lam Dong) to decompose methylene blue (Mb) using the modified fenton system of ferrioxalate H2O2 sunlight

Absolute configuration determination of a silafuran using the modified mosher’s method

Simulations of the Helmholtz equation at any wave number for adaptive grids using a modified central finite difference scheme

The development of a modified method for isolating plasmids from exopolysaccharide producing lactobacillus species using conventional plasmid isolation methods
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.