Đang chuẩn bị liên kết để tải về tài liệu:
Study on furfural conversion into aromatics over Zn/HZSM-5 and Fe/HZSM-5 catalysts

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

ZSM-5 zeolite material (Si/Al ratio = 25) was synthesized with silica source of TEOS and TPAOH template. The zeolite is modified into proton form (HZSM-5) with 343 m2 /g of BET surface area, 324 m2 /g of micropore area, 0.1491 cm3 /g of micropore volume and 5.77 nm of BJH adsorption average pore width. Zinc oxide and iron oxide are dispersed onto HZSM-5 catalyst surface with different contents by wet impregnation method. The results of HZSM-5, Zn/HZSM5, Fe/HZSM-5 catalyst materials still retain the micropore structure of ZSM-5 zeolite. These materials are used as catalysts for furfural pyrolysis in the inert atmosphere (N2) with the temperatures ranged from 400 to 700 °C. |

Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.