Đang chuẩn bị liên kết để tải về tài liệu:
Configure Multicast Routing on the RSM using the PIM DM Protocol

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG Tải xuống

Your network switching equipment currently includes a 4006 Core switch, 2900XL access switch and a Cisco 2600 series external access router. Your network is segmented into four functional VLANs for better network management. VLANs include “Accounting”, “Marketing” and “Engineering” for the users and “default” used for the native VLAN network management. Inter- VLAN routing has been implemented using a Layer-3 routing switch module for the 4006 to allow individuals and servers on your Virtual LANs to exchange information. No VLAN-trunking to the external router has been configured. Also, the WAN connection has not been connected because company is waiting for the ISP to get their job done | Lab 9.5.2 Configure Multicast Routing on the RSM using the PIM DM Protocol IP TV Client 10.1.3.2 24 10.1.3.0 24 E1 CORP 2600 ALSwitch 2900XL 10.1.1.0 24 E0 .2 10.1.20.0 24 10.1.10.0 24 10.1.2.0 24 Accounting VLAN10 Native VLAN1 10.1.30.0 24 IP TV Server 10.1.10.2 24 WAN VLAN2 EIGRP 1 IM-Dense Mode DLRouter Marketing VLAN20 DLSwitch 4006 Engineering VLAN30 Objective Configure multicast routing on the Route Switch Module using Dense Mode Protocol-Independent Multicast. Scenario Current Environment Your network switching equipment currently includes a 4006 Core switch 2900XL access switch and a Cisco 2600 series external access router. Your network is segmented into four functional VLANs for better network management. VLANs include Accounting Marketing and Engineering for the users and default used for the native VLAN network management. InterVLAN routing has been implemented using a Layer-3 routing switch module for the 4006 to allow individuals and servers on your Virtual LANs to exchange information. No VLAN-trunking to the external router has been configured. Also the WAN connection has not been connected because company is waiting for the ISP to get their job done. Enhancement Your LAN functions well and your company executives have now decided to implement an IP TV Multicast system throughout the LAN to include the access switch connected to the external access WAN router as illustrated in the diagram . The implementation calls for the IP TV server to be connected to VLAN10 and clients connected to any Ethernet segment on the corporate LAN including the external access router as illustrated in the diagram. PIM-Dense Mode has been selected as the multicast routing protocol for corporate LAN multicast traffic. Design Switched Network VTP Configuration Information Switch VTP Domain VTP Mode VTP Pruning DLSwitch CORP Server Enabled ALSwitch N A N A N A VLAN Configuration Information VLAN ID VLAN Name VLAN Subnet VLAN Gateway 1 Default Native 10.1.1.0 24 10.1.1.1 2 .