Đang chuẩn bị liên kết để tải về tài liệu:
Design and performance analysis of energy aware routing protocol for delay sensitive applications for wireless sensor networks

Không đóng trình duyệt đến khi xuất hiện nút TẢI XUỐNG

This paper presents a power aware routing protocol designed for wireless sensor networks. The proposed routing protocol is an extended and enhanced version of Dynamic Source Routing protocol. It adds energy awareness to the existing implementation of DSR protocol. | International Journal of Computer Networks and Communications Security C VOL. 1, NO. 2, JULY 2013, 46–53 Available online at: www.ijcncs.org ISSN 2308-9830 N C S Design and Performance Analysis of Energy Aware Routing Protocol for Delay Sensitive Applications for Wireless Sensor Networks NANDINI PRASAD K S1, PUTTAMADAPPA C2 1 Dr. Ambedkar Institute of Technology, Department of ISE, Bangalore 2 Sapthagiri College of Engineering, Department of ECE, Bangalore E-mail: 1p1nandiniks1@gmail.com, 2puttamadappa@gmail.com ABSTRACT Wireless Sensor Networks (WSNs) are emerging network technology with innumerable applications. But security and energy constraints reduce its successful deployments. The nodes in network are greatly involved in transmissions and other processing operations for maintenance other than establishing or handling a call. Due to limited processing ability, storage capacity and most importantly the available battery power of the nodes, it is required to minimize the transmission power and the amount of data transmitted, for efficient operation. This paper presents a power aware routing protocol designed for wireless sensor networks. The proposed routing protocol is an extended and enhanced version of Dynamic Source Routing protocol. It adds energy awareness to the existing implementation of DSR protocol. Energy metric is considered during route selection process to choose an optimal path in terms of overall energy of the nodes along the path, and “low energy notification” method is used during route maintenance process to increase the lifetime of the 'bridge' nodes to avoid network partitioning. The performance of DSR protocol and Energy Aware DSR (EADSR) protocol are compared through NS2 simulation under different scenarios. In all the cases, it is seen that EADSR protocol out-performs DSR protocol by energy saving in efficient manner. Keywords: Transmission, DSR, Energy aware, routing protocol, WSNs. 1 INTRODUCTION The deployment of .

Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.